TopSolid Wood 2007 eğitim notları

Tüm saatler GMT +3 Saat


Full versiyon Görüntüle

YAZAR: huso
Tarih: 25/6/2009, 07:15



TopSolid’Wood 2007
Missler Software iii
Contents
Workshop : Creation of a template carcass . 1
The template. 2
Configuring the Auto-save options . 3
Create the furniture geometry . 3
Create a slot on the panels . 7
Assembly. 9
Configuration of propagation models . 10
Workshop : Creation of a cabinet unit . 15
Create the geometry starting from a template. 16
Configure an edge type . 18
Create and save a panel model . 19
Use a panel entity model. 21
Define drivers . 22
Declaration of a standard component library. 23
Workshop : Creation of a standard component . 25
Create the geometry of the component. 26
Save a standard component . 27
Define a key point. 28
Define the processes of a component. 29
Workshop : Creation of a standard component bowl handle. 33
Create the geometry of the component. 34
Save standard component . 35
Define the key points. 36
Define the processes of the component. 36
Define a catalog code. 37
Workshop : Creation of a shelf component. 39
Create the geometry of the component. 40
Insert a standard component. 41
Create a panel entity . 42
Define drivers . 44
Workshop : Creation of a sliding door component. 45
Create the geometry of the component. 46
Create a parametric expression with conditions . 47
Create a panel entity . 48
Define the drivers . 49
Workshop : Creation of a cabinet unit with sliding doors. 51
Create the geometry starting from a template. 52
Multi-Drilling. 53
Create a drilling model . 55
Create a drilling pattern . 56
Create slots on the panels. 59
Assembly using positioning constraints . 60
Define the drivers . 65
Exploded view . 65
Create a draft document. 66
Create a bill of material . 68
Workshop : Creation of an extruded component . 69
Creation of the profile . 70
Save as a standard component. 72
Use of the extruded component . 73
Workshop : Cabinet arrangement with sliding doors. 75
Insert an extruded component. 76
Define an articulation configuration. 76
Define stops in an articulation configuration . 77
Workshop : Creation of a front frame component . 79
Creation of the component . 80
Save as a standard component. 82
Define the drivers . 82
TopSolid’Wood 2007
iv Missler Software
Workshop : Creation of a reception desk .83
Create the geometry of the reception desk . 84
Model the frame of the reception desk . 87
Trim the profiles and shapes . 88
Insert a sub-assembly. 94
Workshop : Creation of a bill of material file.99
Create a new bill of material model . 100
Workshop : Creation of a multi-draft template . 105
Creation of a multi-draft template . 106
Using the created template with the Multi-draft function . 108
Workshop : Creation of a moulding tool. 111
Moulding tool . 112
Counter moulding tool. 114
Tool correction (Radius) . 116
Declaration of a tool. 116
Stacked tool . 117
Several Moulding Operations . 118
Save the tools . 119
Workshop : Creation of a door . 121
Create the geometry of the door. 122
Model the framework . 123
Moulding of the sides and cross pieces . 124
Counter moulding of cross pieces . 125
Model the panel . 125
Moulding of the panel . 126
Workshop : Configuration of TopSolid'Wood . 127
TopSolid'Design Configuration . 128
TopSolid'Wood Configuration. 134
Implementation of a group configuration . 135
Memo : Duplicate – Repeat . 139
Duplicate. 140
Subsequent operations. 140
Existing operations . 141
Representation in the bill of material . 141
Repeat . 142
Total distance . 142
Distance per copy. 143
Use of the construction tree. 143
Use of the wrench. 144
Exclude specimens from a repetition. 144
Modification of the template. 145
Operation on a repetition . 145
Representation in the bill of material . 146
Memo : Links and dependencies. 147
File links and dependencies . 148
File not found . 148
Copy/Move a file. 149
TopSolid’Wood installation procedure . 151
Installation of TopSolid’Wood . 152
Code installation . 157
Software launches in demonstration mode . 157
Notes . 159
Individual training evaluation report . 163
TopSolid’Wood 2007
Missler Software 1
Workshop



-> Topsolid -> PDA Görünüm - Ana Sayfa
Tüm saatler GMT +3 Saat


Full versiyon Görüntüle



Phpbb PDA Görünüm
Muhendisiz.net Tarafindan Yazilmistir.
Writed by muhendisiz.net © 2004 - 2007 All rights reserved.